|
|
 |
|
|
Pages: 1
Help Please
(Click here to view the original thread with full colors/images)
Posted by: benny
Ok fist of ill i messed up my computer by changing the cpu speed in the Bios config now the computer won't start up it just sits there no video or cd\floopy support im guessing i need to reset by bios i tryed taking out the battery for 30 min but that didn't work its a IBM p2 266 im not sure how to tell what make the motherboard is but I think it's AGPset. id be very happy if some one could help,
Thanks in advance
ben
Posted by: webgator40
If you can get back into BIOS try resetting all settings to Default.
Posted by: Withnail
Try finding out if there is a cmos reset switch, usually a jumper on the board near to the battery. If you can find the mobos model name/number try a google search for its manual. This will tell you where the cmos jumper is..You usually have to take the jumper off then put it on some other pins for a few seconds to reset, but DON'T turn on the computer with the jumper on the reset pins, make sure that it is back in the default position..or your computer may have serious probs doing anything.
Good Luck...but if you are unsure about what I've said don't carry it out.
All the best :-)
|
|
|
|
|
