|
|
 |
|
|
Pages: 1
SV266A BIOS/Booting Problem
(Click here to view the original thread with full colors/images)
Posted by: SaddlerMan
Hi.
I currently have a SV266A mobo running one of my systems but cannot get it to boot.
When I starts, it hangs on "Building DMI....Success"
The system will not boot from the floppy or cd drives either. 
I can get it past here if I go turn off "Hang on all errors" in setup.
When I do this I can boot into safe mode wothout cd or mouse support.
I feel that my BIOS is meesed up but cannot locate an update that will work.
Any advice???
Thanks.
Posted by: compukeith
Have you tried resetting the BIOS? Usually there is a jumper on the motherboard that will do this. If not, uplug power from the system and take out the little watch battery on the mobo - you may need to wait up to a day for all power to dissipate through the system. Plug it all back in and put the battery back and try booting again.
Posted by: SaddlerMan
Will try. Will this completely reset the bios?
Thanks.
Posted by: compukeith
Yes. It will be reset to the factory setttings.
|
|
|
|
|
