|
|
 |
|
|
Pages: 1
Yet another error
(Click here to view the original thread with full colors/images)
Posted by: kidd657
hey i run windows xp and i run across this error about once every 2 days here is what it says any help would be apreciated
A problem has been detected and windows has been shutdown to prevent any damage to your computer.
If this is the first time youve seen this stop error restart your computer ifthis screen appears again follow these steps:
Check to be sure you have adequate disk space if a driver is identified in the stop message disable the driver or check with the manufacturer fir driver updates tey changing video adapters.
Check with your hardware vendor for any bios updates Disable Bios memory options such as caching or shadowing if you need to use safe mode to remove or disable any components restart your computer press f8 to select advanced startup options and then select safe mode
Technical Information
** Stop: 0x0000008E (0xC0000005, 0xFB080A5I, 0xF222167c, 0x00000000)
** BEFCM3xP.sys - Address FB080A51 base at FB080000, Date stamp 3eae3F47
Beginning dumpof physical memory
Physcal memory dump complete
Contact your system admin. or technical support group for further assistance.
Posted by: redwench
google the error.
run the program at www.memtest.org according to directions to test your ram.
Posted by: kidd657
ok i have tried to run the mem test thing but it wont load up on the dos i dont know what to do im so lost here
Posted by: kidd657
path to the program you are trying to run
C:\WINNT\system32\config.nt The system file is not suitable for running MS-DOS and Microsoft Windows applications. Choose 'Close' to terminate the application.
thats what i get
Posted by: kidd657
im still getting these errors any help?
Posted by: gmackay1
Memtest86 does not run in Windows.
It make a bootable DOS disk, reboot to drive A: with that diskette after it is created.
The program will automatically load and run.
Posted by: kidd657
the only problem is i use a laptop no floppy drive
Posted by: gmackay1
Go here: http://www.memtest86.com/
there is an ISO version for CD's.
Posted by: smitheo1
Hey kidd657, what does your event viewer state on the date before the memory dump?
This BEFCM3xP.sys file could not access a windows .dll (Dynamic Link Library) file, a file that is stored and executed from memory.
I can research more for you.
E
Posted by: chainlink
Make sure you've backed everthing up then try the following. Go to the C:/Windows/Repair folder and copy out the following Config.NT and Autoexec.nt then (after saving the originals somewhere else just in case) replace the versions in your main Windows system folder with these. This should fix your "C:\WINNT\system32\config.nt The system file is not suitable for running MS-DOS and Microsoft Windows applications. " problem.
|
|
|
|
|
