Open Tech Support
Open Tech Support Archives
Back to HomeCommunityReviewsGuidesDownloadsTech LinksMarketplaceContact Us
 »  SITE NAVIGATION
»  OTS Home
»  OTS Forums
»  OTS Archives

»  About our site
»  Search our site
»  Support our site

»  What is this site?
»  Who are we?
 
 
 »  ADVERTISMENT
 
  Pages: 1

Morphing nForce4 Ultra into nForce4 SLI

(Click here to view the original thread with full colors/images)


Posted by: Ion Silverbolt

AnandTech has an interesting article up on how to convert an nForce4 ultra motherboard into a Sli capable board.


It really did not come as a surprise that nForce4 Ultra and nForce4 SLI are the same chipset with some capabilities in Ultra turned off. We have seen many cases over the years in which a manufacturer has one CPU-die or one chipset come off a production line, which are then differentiated with laser cuts or some other means of controlling speed or capabilities. What did come as a surprise is how very easy it is to reverse the process - to turn the nForce4 Ultra into the higher-priced and better-performing nForce4 SLI. This is an extremely easy mod for almost anyone.

We suspect that there is more to the story, however, than just the fact that the chip can be modded to be seen by the system as being an SLI chip. nVidia design specifications actually dictate a different board design for Ultra than for SLI. We stated early in this article that DFI is using the exact same board for their SLI and Ultra versions of nForce4. We know that the mod works on the DFI LANParty UT nF4 Ultra-D, but we did not have any other dual video slot Ultra board on which to test the SLI mod. We are expecting the Epox board any day, and we will certainly let you know if the SLI mod works on that board too.

The other surprise is how very close the x16/x2 dual video mode is in performance to the nVidia specified x8/x8. Performance ranged from a worst case of 88.8% of "true" SLI in Half life 2 1600x1200 4xAA/8xAF to slightly better than "true" SLI performance in Far Cry. These numbers are good enough that you can understand why MSI, DFI, and Epox were all planning to release dual-video boards based on the nForce4 Ultra chipset. With nVidia doing everything that they can in Forceware drivers to disable support for Ultra SLI, we can also well understand the reluctance of many manufacturers to try to bring Ultra SLI boards to market.

The discovery that the Ultra chipset can be easily modded to SLI removes a major obstacle to SLI performance on the cheaper Ultra boards - if the manufacturer made provisions for SLI. Once the SLI mod is complete, the system and nVidia drivers see the chipset as a full SLI chipset. This removes the driver issues and the ability of nVidia to turn off support in "non-complying Ultra SLI chipsets".




Posted by: taco_fox

hmm.. I thought I read nVidia was going to try to put a stop to that



 
Copyright 2000-2008 Open Tech Support.  All Rights Reserved.  Site Design and Development by Tolitz Rosel.