|
|
 |
|
|
Pages: 1
Cant host wc3tft games
(Click here to view the original thread with full colors/images)
Posted by: shadessls
Ok I tried going to the westell site to figure out which options to change to enable people to join my custom games, but it's simply too confusing for me to figure out. Somebody knowledgable in this stuff please help me out. I also looked at people with similar problems but couldn't find one who used westell ><. sp2 fireall is disabled.
Dsl thing information.
Westell
model: b90-327w15-06
rev: D
aseembled in USA
Posted by: Dynamix
To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.
Do not skip this step!
Enter Static IP Address
Open a web browser like internet explorer or Netscape.
http://portforward.com/english/rout...-220030-040.jpg
Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.1.1.
http://portforward.com/english/rout...-220030-041.jpg
You should see a box prompting you for your username and password. Enter your username and password now. By default the username is blank, and the password is NOLOGIN. Click the Ok button to log in to your router.
http://portforward.com/english/rout...-220030-042.jpg
Click the Expert Mode button on the left hand side of your screen. Then under Home click the Configuration button on the left hand side of your screen. You should now be at the following screen.
http://portforward.com/english/rout...-220030-043.jpg
In the new menu that appeared under Configuration, click the NAT button.
http://portforward.com/english/rout...-220030-044.jpg
Click the Define Customer Service button to move to the next page.
http://portforward.com/english/rout...-220030-045.jpg
Put a dot in the Port Forwarding Ranges of Ports radial button. Then click next at the bottom of this page.
http://portforward.com/english/rout...-220030-046.jpg
Service Details
Service Name: WarcraftIII1
Type: Port Forwarding
Port 1
Protocol: UDP or TCP
Global Port(s): 6112-6119
Base Host Port: 6112
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Warcraft III requires you to forward the 6112-6119 ports. Go ahead and enter the settings shown above into the virtual server menu. When you have finished entering data in the Port Range window, click Next and you should see the above confirmation window with your data in it. Click the Close button to continue.
http://portforward.com/english/rout...-220030-048.jpg
Use the Service Name drop down box to select the first configuration you just created. Then click the Enable button to enable it. You will need to repeat this step for each service that you created.
And that is it! You are done!
|
|
|
|
|
