|
|
 |
|
|
Pages: 1
Can't Host Counter-Strike Server (network)
(Click here to view the original thread with full colors/images)
Posted by: darkknight1223
Hi I am having problems hosting my CS server. No one can see or join my server. I know it has something to do with port forwarding, but I am confused.This is the only thing my guide says about port forwarding and IP Mapping. It is unclear about port forwarding. I also play starcraft, and I used the IP mapping to open port 6112. For some reason, it wont let me open 27015.
RouteFinder RF500S User Guide 77
IP Mapping is available only when NAT is enabled on the General Settings screen. If NAT is
enabled for a particular port, that port is firewall protected. The Enable IP Mapping
function allows you to open a “hole” in your firewall to allow access to your LAN via the
Internet. For example, you can use the IP mapping function to access an FTP server on
your LAN via the Internet. IP Mapping is most suitable to fixed or static IP addressing.
For each service you’d like to set up, enter:
1. Port No: Select either the WAN or Async (Serial) port.
2. External IP: Enter the IP address supplied by your ISP in the External IP field. If
your ISP uses dynamic IP addressing, set this field to 0.0.0.0. Your device will use
the dynamically assigned address when connecting to your ISP.
3. External Port: Enter the TCP/IP port number for the service that you will be using
for IP mapping. Common TCP/IP port numbers are:
WWW Port 80
FTP Port 20 or 21
SMTP Port 25
POP3 Port 110
Chapter 5 – RouteFinder Manager
If you would like to map all services for this external IP address to a computer on
your LAN, you can enter port number 0. This means that whenever anyone
accesses your external IP address, they will automatically be “mapped” to the
internal computer that you specify, regardless of what port number they are using.
4. Internal IP: Enter the Internal IP address of the server to which you want to map
the External IP address.
5. Internal Port: Enter the port number for the service that you will be using for this
IP mapping.
6. Click Insert to include the mapping.
7. Click OK when you have completed mapping addresses.
Note: IP Mapping function allows you to have only one port service on your LAN. For
example, if you map an external IP (16.895.1.3) to an internal IP address (192.168.2.22 -
a www server), only the internal IP address in your local network can serve as the
www.server for the external IP address.
My Ip Mapping Chart looks like this:
In.=internal
Ex.=external
For the plain old Port, I can either put in WAN Ethernet Port or Async Port (TCP,UDP)
How do I use this to do port forwarding?
No.| Port | Ex. IP | Ex. Port | In. IP | In. Port
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
thnx-
Posted by: Blackknight
Well I am guessing, it would be:
No.| Port | Ex. IP | Ex. Port | In. IP | In. Port
No.: 1
Port: 27015
Ex.IP: Your WAN IP
Ex. Port 27015
In. IP: Your server's LAN IP
In. Port: 27015
Posted by: darkknight1223
for PORT: you can only put wan or async
Posted by: darkknight1223
And when I did that, it didn't do anything
Posted by: Blackknight
For port I think you want WAN, also make sure your WAN ip and LAN IP are right.
Posted by: darkknight1223
Everthing I inputed was correct
Posted by: darkknight1223
Anyone have any Ideas?
Posted by: Blackknight
Nope, I am out of ideas, try calling the router manufactuer tech support.
|
|
|
|
|
